info@schlagenturkiye.com
EnglishEnglish
TürkçeTürkçeDeutschDeutsch

Latex Lining

schlagen latex astar

It is an acrylic resin emulsion that improves the waterproofing and adherence properties of cement-based mortar.

Areas of Use

  • In repair mortars; It is used as an adhesion enhancer in repairing damaged surfaces of cement-based screeds, concretes and plasters, It is used to ensure water impermeability of all kinds of interior and exterior plasters such as walls and ceilings, between old and new concrete; It is used in screeds to prevent cracking, to increase adhesion and impermeability, and as an adhesion and strength enhancer in adhesive mortars of coating materials such as ceramics.

Product Features

  • Provides impermeability and flexibility.
  • The mortar applied by mixing with Latex Primer increases its resistance to cracking and abrasion; bending strength and impact resistance increase.
  • It is not corrosive.
  • The resistance of structures to external factors and chemicals increases.
  • Provides high adherence.

Surface Preparation

Care should be taken to ensure that the surface is solid, load-bearing, dust-free and clean. It should be cleaned of any residue that may weaken the adhesion. There should be no loose parts on the application surface.

Application

In plaster mortars, 350 kg of cement is mixed dry with 1 m3 of aggregate. Latex Primer product, at a rate of 1-1.5% of the cement weight, is added to approximately 120 liters of water to prepare the liquid mixture. The prepared liquid mixture is added to the powder mixture until a trowel-like mortar is obtained. The application surface should be cleaned of dust, oil and loose parts as a primer between old and new concrete and in screed applications. 1 kg of cement and 3 kg of gear sand [3 mm) are mixed with 1 kg of Latex Primer and 2 kg of water to achieve boza consistency. This prepared mixture is applied to a surface that has been previously saturated with water and does not contain free water by 2 mm. New concrete is applied before this primer dries. In screed production, 1 m3 of suitable aggregate is mixed with at least 350 kg of cement. The liquid mixture prepared with 4-5 kg ​​of latex and 1 DO kg of water is added to the cement-aggregate mixture until a mortar consistency suitable for the screed is obtained. The mortar mixture is applied to the surface whose lower layer is primed. In repair mortar application: 1 measure of cement and 3 measures of sand are mixed. To this prepared dry mixture; the liquid mixture prepared with 1 measure of latex and 1 measure of water is added. It is mixed until a trowel consistency is obtained.

Points to Consider

  • If the surface and ambient temperature where eile latex will be applied is below +5 ° C or above +30 ° C, the permitted temperatures for application should be waited.
  • It is not applied to frozen, melting or frost-prone surfaces.

Packaging

30 kg plastic drum

Storage

It should be stored in its unopened original packaging, in a cool and dry environment, with a maximum of 1O stacks.