info@schlagenturkiye.com
EnglishEnglish
TürkçeTürkçeDeutschDeutsch

P – Mold Release Agent

schlagen p kalıp ayırıcı

P – Mold Release Agent is a mold release agent formulated with mineral oils, resistant to curing temperatures, used to easily remove wooden and playwood molds after concrete casting and to obtain smooth-surfaced concrete.

Areas of Use

  • Used in wood and plywood formwork systems.

Product Features

  • Ensures clean and smooth concrete.
  • Ensures easy and fast separation of the mold from the concrete.
  • Facilitates cleaning of the mold.
  • Does not leave stains on the mold.
  • Extends the life of the mold.
  • Resistant to heat and steam curing applications.

Surface Preparation

Before using the material, the molds must be thoroughly cleaned of concrete residues, wood and iron pieces.

Application

To obtain the best results, P – Mold Release Agent should be applied homogeneously on the mold in a thin layer, using a brush, roller or automatic/manual spraying, without allowing the formation of pools.

Points to Consider

  • P – Mold Release Agent should be mixed before use.
  • For maximum performance; The material should be applied in a thin film layer; since excessive oil use can cause stains on the concrete, excess oil should be removed with a sponge, cloth, etc.
  • The material can be applied in two layers depending on the absorbency of the molds.
  • Try the product on a small area of ​​the surface you will use it on before using it.

Packaging

30 litre canister.

Storage

It should be stored in its original packaging at +5° C / +35° C in dry, protected and ventilated environments, protected from direct sunlight and frost.