info@schlagenturkiye.com
EnglishEnglish
TürkçeTürkçeDeutschDeutsch

Solvent Based Epoxy Primer

schlagen solventli epoksi astar

It is a two-component, epoxy resin-based primer used on metal surfaces.

Areas of Use

It is used for protective and decorative purposes on steel, cast and aluminum surfaces.

Product Features

  • It has excellent spreading properties.
  • It does not leave brush marks or run.
  • Protects metal surfaces against rust.
  • It forms a hard film with good adhesion power.
  • It saves labor and time.
  • It is an anticorrosive paint that is highly resistant to salt, impact, humidity, chalking, water, oil and various chemicals.

Application

The surfaces to be applied must be free of dirt such as oil, rust, dust, etc. Rusty surfaces must be sandblasted, brushed with a wire brush, and wiped. During application, care must be taken to ensure that the surface and ambient temperature are between +5ºC and +30ºC. If old and new metal surfaces to which Bia-Pox Solvent Epoxy Primer will be applied are to be painted for the first time, after sanding until the glossy surface, the oil and dirt on the surface must be removed with thinner and components A and B must be mixed in the specified proportions and applied. Application from 2 Atu and 0.5 meters away is recommended.